Announcement

Collapse
No announcement yet.

97 M3/4/5 running in STU

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • 97 M3/4/5 running in STU

    I've always a sedan and found a unique color combo with lowish miles in Tucson. We bought Olivia and just installed the TCKline SA w/Vorshlag plates(slick design), RTAB limiters, Kosei 17 X 8.5 with Dunlap Star Specs 245/40s.

    Can this car be competitive? What else can be done within the rules? Let me have it!

  • #2
    Re: 97 M3/4/5 running in STU

    First, what in the world is an "M3/4/5".... Wait, don't answer - I don't wanna know.

    What are your goals - fast at local events, an STU National Championship, or somewhere in between?


    We ended our last season with 265/35/18 on 18x10 wheels

    OK, so your wheels are way too narrow for the highest level of competition... you need to be pushing 9" or 9.5", or maybe even 10" wide wheels, and 255/40/17s or 265/35/18" tires, at the very least. With only 8.5" wheels and 245s you won't have any tire advantage over the AWD Subarus (that's their tire width limit, but yours is 285mm!).



    Single Adjustable twin tube shocks probably will not get it done, but who knows. We've placed higher than most BMWs in STU and we did it in 2005-6 with TCKline double adjustables and in 2007 with AST doubles/triples. Still, you need to do a LOT of testing to even learn how to use shocks with this many adjustments before that helps your times. For a first year effort, those SA's will probably be fine.



    Have you done a lightweight battery? Upper the RPM limit? Built a custom header and super light exhaust? Racing seats that weigh 25 pounds each? Racing harness for the driver?

    What are your spring rates, swaybar sizes, and engine mods? Alignment settings? Lightweight brake system components?

    What does the engine dyno at? Post the dyno plot.

    What does the car weight? Has it been corner balanced?

    WHAT IS YOUR BUDGET, skill level with respect to mechanical work, driving accomplishments in the past, and racing schedule commitment? Are you willing to put in more than a couple of years of effort, and at least 2 events every month? Do you plan to street drive the car, and if so, how often? Do you have a truck and trailer?



    How legal do you want the car to be? I'm not advocating anything, just need to know where you stand on legality. There is no protesting in STU at Nationals, as evidenced by the past 5 years of competition. Just saying...

    Answering those things will help us point you in the right direction(s). You could end up with a trailer queen if you maximize every rule in STU and maybe still not win. Just don't expect this to be an easy fight when using a non-Turbo, non-AWD car for this class.



    I'm not trying to dampen your spirits, just know that Hanchey, Amy and I had put in a LOT of time, work, testing, money and sweat into making an STU winning E36 M3. With 25-28 events + 3 dedicated practice sessions (where we rented a track and tested till we were sunburned and dead) each season. We made our own shocks and suspension bits, trailered the car to events, and probably spent more than most M3 competitors in the class - and only took home 2nd and 6th place trophies in 4 years of competition in STU (but we did bring home two consecutive 1st places at Nationals in STU-L). We strove to be 100% legal and to still street drive the car, and those two factors probably hurt our results in the end.
    Last edited by Fair!; 09-26-2008, 03:40 PM.
    Terry Fair - www.vorshlag.com
    2018 GT / S550 Dev + 2013 FR-S / 86 Dev + 2011 GT / S197 Dev + C4 Corvette Dev
    EVO X Dev + 2007 Z06 / C6 Dev + BMW E46 Dev + C5 Corvette Dev

    Comment


    • #3
      Re: 97 M3/4/5 running in STU

      There was more we could have done to win with an E36 M3, if we had continued in STU with this car, including:
      • Started with a 1995 M3, no sunroof car. The 1995 doesn't have the ASC 2nd throttle body restriction
      • Maximized the weight with aftermarket braking system, seats (ours was 31 pounds), and exhaust
      • Built a pro-built motor to the limit of the rules
      • Had a custom header built that maximized power over a wider RPM range, then ECM tuned the car to within an inch of its life
      • Built a front splitter and maximized the aero rules for STU
      • Ditched the radio and speakers
      • Made the 265/35/18 tires and 10" wheels fit better
      • Fought for a rules change to allow the 285s to fit legally!
      • Cheated, a lot. j/k!
      Terry Fair - www.vorshlag.com
      2018 GT / S550 Dev + 2013 FR-S / 86 Dev + 2011 GT / S197 Dev + C4 Corvette Dev
      EVO X Dev + 2007 Z06 / C6 Dev + BMW E46 Dev + C5 Corvette Dev

      Comment


      • #4
        Re: 97 M3/4/5 running in STU

        The only mods completed are the strut bar, SA suspension 450/500lb and the RTAB limiters. Everything else is new/serviceable and stock. Plan to drive 6K/yr on the street.

        I won't break the rules but do bend them with our Z3 in BS-T1 now. Run 01Rs on the Z3 but chose Star Specs for the M3 4 door 5spd.

        It has the sunroof, Modena leather with Boston Metallic, very rare. Plan to leave the interior intact.

        Engine has 113K on it. Great compression, smooth idle but no dyno. I expect 225 at the wheels. No software yet. Removed baffle from air box for now but will add cold air kit before next year.

        What suspension mods should we do? How big a tire combo can we run without massaging body? ECU software recommendations? Any other recommendations?

        Thanks

        Comment


        • #5
          Re: 97 M3/4/5 running in STU

          Hello, does anyone reads these post?

          Comment


          • #6
            Re: 97 M3/4/5 running in STU

            I do, but I don't really have much input. Fair has been prepping the race car or racing all weekend.
            -Sean Martin
            2009 Pontiac G8 GT

            Comment


            • #7
              Re: 97 M3/4/5 running in STU

              Originally posted by 97M3
              Can this car be competitive? What else can be done within the rules? Let me have it!
              Locally, sure.

              Nationally, No.

              Comment


              • #8
                Re: 97 M3/4/5 running in STU

                Agaain...

                What are your goals - fast at local events, an STU National Championship, or somewhere in between?
                Terry Fair - www.vorshlag.com
                2018 GT / S550 Dev + 2013 FR-S / 86 Dev + 2011 GT / S197 Dev + C4 Corvette Dev
                EVO X Dev + 2007 Z06 / C6 Dev + BMW E46 Dev + C5 Corvette Dev

                Comment


                • #9
                  Re: 97 M3/4/5 running in STU

                  Originally posted by 97M3
                  It has the sunroof, Modena leather with Boston Metallic, very rare. Plan to leave the interior intact.
                  Sounds like you have some self-implemented limitations on the sucess of your new car at being competitive, at least nationally. I agree with Fair, what are your goals? If you just want to show up locally and have fun, sounds like you are done modding. Seat time will help you more than anything else at being competitive. If you want to step up to a National level, that's a whole other thing and Fair layed out a great plan for you. Of course it will start with you buying another car...
                  McCall

                  Comment


                  • #10
                    Re: 97 M3/4/5 running in STU

                    We own to general automotive shops in the bay area. This car will be the advertising board for local BMWCCA, SSCA, UFO and local and regional AAS events.

                    Not removing the interior, already own the 17 X 8.5 Kosei with Dunlop Spec Stars and installed a TCK SA setup with 450/500 springs and plates.

                    What tire pressures do like to start with. This is were you might consider being specific. I run 43/38 cold with my Z3 running on 01Rs, very neutral with co-driver.

                    What pads do you like? This car will be driven on the street 10%. The remainder will be spent autocrossing, no track events expected.

                    Stock bars on the car, stick with them or replace and with what? What settings? My Z3 has H&Rs set medium front and rear for neutral handling.

                    As for the engine mods, I assume the only legal areas are cold air induction, software and delete fan? I don't see the header helping enough. Cat back system is how much lighter? Worth the expense?

                    Throw it around a little...
                    Last edited by 97M3; 06-22-2009, 03:14 PM.

                    Comment


                    • #11
                      Re: 97 M3/4/5 running in STU

                      If it's driven on the street 10%, I would go with Hawk HP+. That seems to be a good autocross pad, with a bit more noise and dust than a regular street pad. Pressures are going to vary based on suspension set up, tire model, etc. You should get or borrow a pyrometer and do some testing of the tire temps and play with the tire pressures if you can find some kind of autocross practice to attend.
                      -Sean Martin
                      2009 Pontiac G8 GT

                      Comment


                      • #12
                        Re: 97 M3/4/5 running in STU

                        The suspension is TCKline coilover with 450/500 springs and single adjustable Konis. The tires are 245/40-17 Star Specs.

                        How firm should the shock settings be?

                        What alignment should we go with THIS Sunday?

                        Someone throw out their tire pressures they run NOW.
                        Last edited by 97M3; 06-22-2009, 03:14 PM.

                        Comment


                        • #13
                          Re: 97 M3/4/5 running in STU

                          I run around 33-34 cold in my Dunlop Z1 star specs and never let them above 40 psi. They don't get greasy but you can feel the grip fall off at pressures above 40.

                          Comment


                          • #14
                            Re: 97 M3/4/5 running in STU

                            I have TC Kline Koni SAs on my E46 and I run full stiff up front and about half a turn on the rears. Your mileage may vary, etc. Thanks for the tire pressures, Dave.
                            -Sean Martin
                            2009 Pontiac G8 GT

                            Comment


                            • #15
                              Re: 97 M3/4/5 running in STU

                              Originally posted by 97M3
                              The suspension is TCKline coilover with 450/550 springs and single adjustable Konis. The tires are 245/40-17 Star Specs.

                              How firm should the shock settings be?
                              Shock settings really depend on the entire suspension set-up, surface, conditions, temperature, your driving style, etc. One man's settings on a different car/day/course have almost ZERO relevance to yours.

                              This shock tuning guide is helpful to our customers, so give it a shot: http://www.vorshlag.com/documents/Tuning_AST_Shocks.pdf

                              Originally posted by 97M3
                              What alignment should we go with THIS Sunday?
                              Alignments are pretty simple for an E36....

                              Run -3.5 to -4 degrees of negative camber in front, about -2 to -2.5 in rear. 1/2" of total toe in in the rear, maybe as much as 1/8" total toe out up front. Max positive caster in front, so long as you don't infringe on the camber settings noted above.

                              Originally posted by 97M3
                              Someone throw out their tire pressures they run NOW.
                              Again, this is something you have to look at to judge, and changes depending on the surface and temps. Start at ~35 psi front, 32 psi rear and adjust up down depending on the handling characteristics and based on the scrub on the edges of the tires. If the car has a push, run more front pressure or less rear. Conversely, if its loose run more rear pressure or less front. If someone tells you otherwise they are misinformed (and yes, people get this simple aspect of tire pressure tuning ass-backwards all the time). The tire pressures will creep up after every run - check and equalize them to your base setting after every run, or alter them and note the change in your log book.

                              If the edges of the tire shoulder are scrubbing down the sidewall, run more air pressure on that end of the car. A $20 air pressure tank can be purchased at most auto parts stores - fill it up and take it to the grid with you. The wite shoe polish applied on the edges trick works well for newbies, but after a while you can see fresh scrubbing without getting that white stuff everywhere.

                              When making tire pressure changes make BIG ones at first, until you get the hang of it. I hear people claiming that "that half psi change transformed the car!". I make fun of those people, too. 2 psi changes are normal, but when finding a new set-up like you are doing, maybe even 4-5 psi jumps are needed. Its unusual to need more than 40 psi in a tire like that, unless the car is really set-up poorly or the tires don't fit the wheels well. I've used 50 psi tire pressures in a very poor handling car before, but that's probably outside of the range you'd ever need on a BMW.

                              With a 245mm tire on an 8.5" wheel, that's a bit squeezed, so running a tick more tire pressure than normal may help keep the tire more square on the rim. Its a trick to help compensate for a narrow wheel. A (edit) 245mm tire works OK on an 8.5" wheel, but better on a 9" wide wheel wheel.


                              255/40/17 on 17x9.5" wheel

                              There are other tricks to help you find the optimal set-up, including:



                              1. Timed testing at practice events. Invaluable.
                              2. Finding a faster and more experienced co-driver. You can't teach this sport to yourself.
                              3. Observing pictures of your car loaded in a corner at events. Look for positive camber on any tire that's being loaded and keep adding more negative camber (or spring rate or swaybar or etc) to eliminate that. A loaded radial tire should still have a tick negative camber, as shown in the picture above - the front looks about perfect, but the back could have used a tick more negative.
                              4. Pyrometer testing can help you nail down tire pressure and camber settings, but its best done at a practice event with a skidpad and a helper. You have to get measurements QUICKLY.
                              5. Data acquisition testing at each and every event you attend can help you amass a lot of data about your set-up and driving. Get a data logger with multiple accelerometers and a GPS sensor and log every run.
                              6. An autocross log book should be made for every car to catalog every run at every event you attend. Write down initial tire pressures and shock settings and fill in your observations and changes after every run.

                              Cheers,
                              Last edited by Fair!; 09-30-2008, 12:55 PM.
                              Terry Fair - www.vorshlag.com
                              2018 GT / S550 Dev + 2013 FR-S / 86 Dev + 2011 GT / S197 Dev + C4 Corvette Dev
                              EVO X Dev + 2007 Z06 / C6 Dev + BMW E46 Dev + C5 Corvette Dev

                              Comment

                              Working...
                              X